Digitus DS-15202-1, User Manual

Page: 9 / 146

-- 9
corresponding PC.
 On-Line:
GREEN LED
indicates that the CAT5 8-PORT/16-PORT IP-KVM is ready to the
corresponding PC
.
 Reset Switch :
Press Reset switch when you want to reset the system. This switch must be pushed
with a thin object like the end of a paper clip, or a ball point pen.
4.2. Rear View

8-Port
Figure 3: CAT5 8-Port IP-KVM rear view
 16-Port
Figure 4: CAT5 16-Port IP-KVM rear view
 Ethernet LED Indicators:

IP-Ready
:
ORANGE LED
blinking per second when system is ready
.
 Ethernet-Link:
GREEN LED
indicates that Ethernet connection established
.
4.3. Single stage installation
4.3.1. Precaution:
 Please turn off computers and devices when you start to install KVM Switch.
 For computers with Keyboard Power On function, please unplug the power cords
in advance. Otherwise, the switch might not work properly.
 If your computeres work under Windows 98, please connect KVM switch to
computers via PS/2 ports, because Windows 98 does not support installation at
first time as through USB HID installation driver.

Some kind of old computers must enable USB setting in BIOS in advance to
make USB interface work.
 This KVM switch does not guarantee to fully support USB keyboard with USB
HUB.