Digitus DS-15202-1, User Manual, Page: 112 / 146

-112-
The following is a description of each of the fields on the Device Settings > Event Log
screen :
 List logging enabled
The usual way to log events is to use the internal log list of the CAT5
8-PORT/16-PORT IP-KVM. To enable this internal log, tick the “List Logging
Enabled” checkbox in
Device Settings > Event Log . To view the actual log list,
go to Maintenance > Event Log .
Since the CAT5 8-PORT/16-PORT IP-KVM's system memory is used to save
the event log, the maximum number of saved log list entries is restricted to 1000
events. After this maximum is reached, older log entries will be deleted to make
room for newer ones.
You can clear the internal log by clicking the Clear button.
Warning
If the reset button on the web GUI is used to restart the CAT5
8-PORT/16-PORT IP-KVM, all log data will be saved and will be available
after the CAT5 8-PORT/16-PORT IP-KVM has been restarted. However, if
the CAT5 8-PORT/16-PORT IP-KVM loses power or a hard reset is
performed, all log data will be lost. To avoid this, use one of the following log
methods.
 NFS Logging enabled
This allows you to log events to a file on an NFS server. To use NFS Logging,
tick the
NFS Logging Enabled checkbox and enter the NFS Server , NFS
Share , and NFS Log File to use. To write log data from more than one CAT5
8-PORT/16-PORT IP-KVM devices to only one NFS share, you will need to use
a unique NFS Log File name for each CAT5 8-PORT/16-PORT IP-KVM. After
making your changes, click the
Apply button. After applying the settings, the
CAT5 8-PORT/16-PORT IP-KVM will try to mount the NFS share immediately, so
make sure that the NFS share is online and accessible to the CAT5
8-PORT/16-PORT IP-KVM.
 SMTP Logging enabled
This allows the CAT5 8-PORT/16-PORT IP-KVM is able to send event e-mails to
the specified e-mail address. These mails contain the same description strings as
the internal log file, and the mail subject will contain the event group of the log
event. In order to use SMTP Logging, tick the
SMTP Logging Enabled checkbox,
enter the SMTP Serve r (<server IP>: <port>), Receiver Email Address , and
Sender Email Address , then click the Apply button to save your changes.