Digitus DS-15202-1, User Manual, Page: 32 / 146

32
9 Configuration
9.1 Network configuration using PSetup utility
After the initial setup, the CAT5 8-PORT/16-PORT IP-KVM can be managed via
the Internet using a standard browser that lets you control the device/s attached
to it. However, to configure the CAT5 8-PORT/16-PORT IP-KVM’s network
access, the user must first run the PSetup Utility software that is included on the
CD-ROM included in your package.
The PSteup Utility lets you set up the CAT5 8-PORT/16-PORT IP-KVM’s network
configuration (IP address, Subnet mask, DHCP, etc) from any computer that is
connected to the same subnet. This program is also useful if you ever need to
view or change the network settings of the unit. If the initial or default basic
configuration does not meet your requirements, use the PSetup program to
change the configuration to suit your needs.
When open the PSetup Utility on your computer, the PSetup Utility window (see
the screenshot below) will appear.
To use the PSetup Utility, please follow the procedures described below.
Finding the CAT5 8-PORT/16-PORT IP-KVM on your network via the Psetup
Utility:
1) Make sure the computer you are using to set up the CAT5 PORT/16-PORT
IP-KVM is connected to the same local network that the CAT5 8-PORT/16-PORT
IP-KVM is connected to.
2) Open the PSetup Utility on your computer. The PSetup Utility window (see
the screenshot above) will appear.