--
19
6.6.2.
Stop auto-scan function
Press any key on keyboard to
STOP
the auto-scan function. Press the push
button on KVM front panel to select active port can stop the auto-scan function,
too.
6.6.3. Auto-scan
mode
There are two auto-scan modes, please refer to section
7.3.1 Setup in OSD –
Scan Mode
to setup the auto-scan mode.
Scan all working computers.
Scan all computers which are marked for auto-scan.
6.6.4.
Auto-scan time interval
The auto-scan time interval can be adjustable by pressing
<F1>
in OSD main
menu. Please refer section
7.3.1 Setup in OSD – Scan Time.
Note: You can also start auto-scan function by pressing
<F2>
in OSD main menu.
Please refer section
7.4 Auto-Scan in OSD.
6.7. Console Lock
If the security mode is enabled in OSD mode (by pressing
<F5>
in OSD mode), you
can lock console by pressing
<Scroll Lock>
twice, and then
<H>
and
<Enter>
. The
KVM will be locked until an authorized user login.
<Scroll Lock>
→
<Scroll Lock>
→
<H>
→
<Enter>
To
UNLOCK
console, please press any key according to screen message, then key in
User Name and Password. The KVM switch and console devices will be unlocked and
back to normal status.
Note: You can also execute console lock function by pressing
<F3>
in OSD main
menu. Please refer to section
7.5 Console Lock in OSD.
6.8. Call Adjust Video Menu
Press
< Scroll Lock>
twice, then
<C>
and
<Enter>
, then the OSD “Adjust Video” will
be displayed on the monitor screen. You can adjust video quality for current active
channel in first layer.
<Scroll Lock>
→
<Scroll Lock>
→
<C>
→
<Enter>
Summary of Contents for DS-15202-1
Page 1: ... 1 CAT 5 IP COMBO KVM SWITCH 8 PORT 16 PORT User Manual DS 15202 1 DS 16202 1 ...
Page 67: ... 67 Make sure Wake on Magic packet is Enable ...
Page 103: ... 103 Figure 70 IP Filter Setting 11 5 4 Certificate Figure 71 Certificate Settings ...
Page 124: ... 124 Check out the device information to see the updated firmware is running ...
