Digitus DS-15202-1 Page 135 User Manual Download

Page: 135 / 146

-135-

14. KVM Firmware Upgrade Procedures

The KVM switch provides the firmware update for the following functions:



USB console:

Update for USB console keyboard/mouse compatibility.

The firmware filename for USB console is like

OTG_CAT5KVM_SCAN_Vx.xx.300.



PORT0:

Update for 1~8 Port communication.

The firmware filename for PORT0 is like

CK_PortCOM_Vxxx.300.



PORT1:

Update for 9~16 Port communication.

The firmware filename for PORT1 is like

CK_PortCOM_Vxxx.300



CSL1:

Update for PS/2 console and on-screen-display.

The firmware filename for CSL1 is like

CK_CSLOSD_Vxxx.300.



CSL2:

Update for PS/2 console keyboard/mouse compatibility.

The firmware filename for CSL2 is like

CK_CSL2_Vxxx.300.

To update the firmware, please do the followings:

1.  Disconnect all the KVM cable between KVM and computer.
2.  Disconnect all the keyboard and mouse plugged on KVM.
3.  Disconnect the VGA cable between KVM and monitor.
4.  Apply DC 12V adapter to the KVM.

Execute the firmware update utility “Prog182S.EXE”.

Figure 82: Firmware Upgrade Utility

6. Use the mini-USB cable to connect KVM firmware update port and the USB

port of computer which runs the firmware update utility.

Summary of Contents for DS-15202-1



















































































































































Search results

Summary of Contents for DS-15202-1

Reviews:

Related manuals for DS-15202-1

Brands by name

Popular brands

Digitus DS-15202-1, User Manual

Search results

Summary of Contents for DS-15202-1

Reviews:

Related manuals for DS-15202-1

Brands by name

Popular brands