Digitus DS-15202-1, User Manual, Page: 54 / 146

54
video display, but some small changes in the display may not be recognized immediately.
A small filter setting displays all changes instantly, but may lead to a constant stream of
network traffic, even if the display content is not actually changing (depending on the
quality of the video input signal). In general, the default setting should be suitable for most
situations.
Click the “Force Composite Sync” button if you are using a SUN computer or server on the
Host-side.
After adjusting any settings, click the
Apply button to save your changes.
•
Refresh Video
Click this menu item in the Options menu list of the Remote Console to refresh the video
stream coming from the Host system. Usually, only the parts of the video feed that have
changed will be sent from the CAT5 8-PORT/16-PORT IP-KVM in order to save network
bandwidth. This function is mainly for troubleshooting issues that may occur when old
video fragments are not updated quickly for some reason. One of the reasons for this
could be that the “Noise Filter” setting for video has been set too high. To adjust the
Noise Filter setting, please refer to the previous section.
• Soft Keyboard
Figure 40: Soft Keyboard
Click this menu item to open up the submenu for the Soft Keyboard.
Show
Clicking this item brings up the Soft Keyboard. The Soft Keyboard may be necessary
if your Host system runs a completely different language and country mapping than
your Remote computer.
Mapping
This menu item is used for choosing the specific language and country mapping of the
Soft Keyboard.