Digitus DS-15202-1, User Manual, Page: 17 / 146

-- 17
<Scroll Lock> → <Scroll Lock> → < ALT > → <Enter>
 Switch to left one channel
<Left ALT>
→ < Left ALT >
 Switch to right one channel
<Right ALT>
→ < Right ALT >
6.4. Channel Select - Cascade Chain Layer
You can select the active channel directly under cascade chain connection.
The following hot key sequence is used for quick channel selection.
Press
<Scroll Lock> twice, <D> , the cascade channel number (1, 2, 3……16) , and
Press <Enter> .
 Channel select to first layer
< Scroll Lock >
→ < Scroll Lock > → <D> → < CH-L1 > → < Enter >

Channel select to second layer
< Scroll Lock >
→ < Scroll Lock > → <D> → < CH- L1 >
→ <D> → < CH-L2 > → < Enter >
 Channel select to third layer
< Scroll Lock >
→ < Scroll Lock > → <D> → <CH-L1 >
→ <D> → < CH-L2 >
→ <D> → < CH-L3 > → < Enter >
Note: With cascading 3 layers, you can select last layer directly;
Example: press
<Scroll Lock> twice, then D2D5D7 , and <Enter> :
D2 : layer 1 channel 2 links to
D5 : layer 2 channel 5 links to
D7 : layer 3 channel 7 selected
Note: You can also select active channel of cascade chain in OSD menu. Move the
indicator bar to the chanel selected to switch by using <arrow key>, <Page
Up> or <Page Down> , and then press <Enter> to switch to the target port.
Please refer to section 7.2.2 Channel select to cascade port.
6.5. Buzzer sound Disable / Enable
Press <Scroll Lock> twice, then <B> and <Enter> . The buzzer sound will be disabled
/ enabled alternately. The buzzer sound default setting is ON .
<Scroll Lock> → <Scroll Lock> → <B> → <Enter>