-62-
11.1.1 KVM Console
Figure 49: KVM Console
To open the KVM console either click on the icon
Console
or
Remote Control >
KVM
Console
of the menu entry on the left or
Click to open
of the console picture
on the right.
11.1.2 Telnet Console/SSH Console
In general, the Telnet or SSH interface supports two operation modes: the
command
line mode and the
terminal
mode. The command line mode is used
to control or display some parameters. In terminal mode, the pass-through
access to serial port is activated (if the serial settings were configured
accordingly). All inputs and outputs are redirected to the device via the serial
port, and its answers are displayed on the Telnet interface.
In order to log in with Telnet or SSH, you have to enable the access settings
from
Device Settings > Network
.
Summary of Contents for DS-15202-1
Page 1: ... 1 CAT 5 IP COMBO KVM SWITCH 8 PORT 16 PORT User Manual DS 15202 1 DS 16202 1 ...
Page 67: ... 67 Make sure Wake on Magic packet is Enable ...
Page 103: ... 103 Figure 70 IP Filter Setting 11 5 4 Certificate Figure 71 Certificate Settings ...
Page 124: ... 124 Check out the device information to see the updated firmware is running ...
