Digitus DS-15202-1, User Manual

Page: 15 / 146

-- 15
6. Hot Key Operation
6.1. Call OSD Menu
Press < Scroll Lock> twice and <Enter> , then the OSD “Main Menu” will be displayed
on the monitor screen. All of the KVM parameters can be setup in OSD mode. You can
also execute some KVM functions in OSD.
<Scroll Lock> → <Scroll Lock> → <Enter>
6.2. Leading Hot Key Select
The two-steps hot key sequence is used for quick function execution.
The leading key is
<Scroll Lock> by default. However, you can change the leading
hot key if you want.
By pressing
<CTRL> twice, <New Hot Key>, then press <Enter>, you can change the
leading hot key.
The available leading hot key are
<Scroll Lock> , < Num Lock > or < Caps Lock >
for option.
 Setup leading hot key to < Scroll Lock >
< CTRL >
→ < CTRL > → < Scroll Lock > → < Enter >
 Setup leading hot key to < Num Lock>
< CTRL >
→ < CTRL > → < Num Lock > → < Enter >
 Setup leading hot key to < Caps Lock >
< CTRL >
→ < CTRL > → < Caps Lock > → < Enter >
Note: You can also change leading hot key by pressing <F1> in OSD main menu.
Please refer to section 7.3.5 Setup in OSD – Hot Key.
6.3. Channel Select - Single KVM
6.3.1. Specific channel selection
You can select the connected computers by using the two-step Hot Key
sequence. Press
<Scroll Lock> key twice (Step 1), then press key (1 to 16) and
<Enter> (step 2) to select the computer you want to control.