
-108-
The Modem Settings panel allows you to configure the remote access to the
CAT5 8-PORT/16-PORT IP-KVM using a modem. The meaning of each
parameter is described below. For further assistance with these settings,
please contact your network administrator.
Serial line speed
Enter the speed the CAT5 8-PORT/16-PORT IP-KVM will communicate with
the modem. Most modems available today will support the default value of
115200 bps. In case you are using an old modem and having connection
issues, try to lowering this speed.
Modem Init String
Enter the initialization string used by the CAT5 8-PORT/16-PORT IP-KVM to
initialize the modem. The default value will work with most standard modems
directly connected to a telephone line. In case you have a special modem, or
if the modem is connected to a local telephone switch that requires a special
dial sequence in order to establish a connection to the public telephone
network, you can change this setting by entering a new string. Refer to the
modem's manual for the modem init string syntax.
Modem server IP address
Enter the IP address will be assigned to the CAT5 8-PORT/16-PORT IP-KVM
itself during the PPP handshake. Since it is a point-to-point IP connection,
virtually every IP address is possible but you must make sure it is not
interfering with the IP settings of the CAT5 8-PORT/16-PORT IP-KVM and
your console computer. The default value will work in most cases.
Modem client IP address
Enter IP address that will be assigned to your console computer during the
PPP handshake. Since it is a point-to-point IP connection, virtually every IP
address is possible but you must make sure it is not interfering with the IP
settings of the CAT5 8-PORT/16-PORT IP-KVM and your console computer.
The default value will work in most cases.
Pass through access to serial port via Telnet
Using this option, it is possible to connect an arbitrary device to the serial port
and access it (assuming it provides terminal support) via Telnet. Select the
Summary of Contents for DS-15202-1
Page 1: ... 1 CAT 5 IP COMBO KVM SWITCH 8 PORT 16 PORT User Manual DS 15202 1 DS 16202 1 ...
Page 67: ... 67 Make sure Wake on Magic packet is Enable ...
Page 103: ... 103 Figure 70 IP Filter Setting 11 5 4 Certificate Figure 71 Certificate Settings ...
Page 124: ... 124 Check out the device information to see the updated firmware is running ...