58
11.0 How to Select and Run Trains
11.1 Turn track power on and off
The
TRACK POWER
indicator on your DT402 display shows the track power
status. There is also a
TRACK STATUS
LED on your Command Station. If the
TRACK POWER
indicator is lit then track power is on. To turn the track power
on or off:
1. Press the
PWR
key on the DT402. You will see a screen similar to the one
below. You will now be able to toggle the track power on/off:
2
Press the
N / -
key to toggle the track power off. The
TRACK POWER
Indicator on your DT402 and on your Command Station will go off.
3. Press the
Y / +
key to toggle the track power on. The
TRACK POWER
Indicator on your DT402 display and the
TRACK STATUS
Indicator on
your Command Station will come on solid.
4. Press the
PWR
key again to return the DT402 to the operating mode.
5. If the
TRACK POWER
Indicator is blinking then the layout is frozen in the
“IDLE”
state and no locomotives will move. To exit this state simply turn
on track power again. This is a common issue with new users, and is easy
to correct.
Track Power Indicator
Track Power Indicator