61
The illustration below shows the display after address
“00”
is selected on
the
R
Throttle
and address
“03”
is selected on the
L
Throttle
, We see the
TRACK POWER On Indicator
in the top line, the speed bar graphs at 0
speed and the text area also at 0 speed for both throttles.
7. Turn the
L
Throttle
knob clockwise slowly to increase the speed of the
decoder equipped locomotive. As the value in the left display increases,
the locomotive on the track will begin to move.
8. Press the
L / ReVeRSe
key on the left side of the DT402 or double click
the
L
Throttle
knob to reverse the direction of the decoder equipped loco.
The
L
Direction Indicator will toggle between the left and right arrows. In
the case of the decoder equipped loco, the arrow indicates locomotive
direction (forward or reverse), not the direction on the track.
9. Use the
R
Throttle
knob and
ReVeRSe / R
key to control the analog loco
and the
L
Throttle
knob and
L / ReVeRSe
key to control the decoder
equipped loco. You can control both at the same time.
Notice as you use each throttle knob or direction key that the loco with the
“blinking smoke” will change to that side of the throttle. The side with the
“blinking smoke” indicator is the active throttle. To control the headlight or
other functions, the locomotive must be on the active throttle.
2 digit address 03
Selected on the
L Throttle
Running at 20% speed
In reverse
Function 0, 1, & 3 on.
An analog loco address 00
Selected on the
R Throttle
Running at 25% speed
The direction arrow below
the Loco Icon does not
indicate actual direction
for Analog locos.
Track Power
Indicator ON
Throttle in normal operations
mode indicated by Fn.
In Function (Fn) Mode
Throttle knobs control Loco's
Speed & Direction
Keypad entries control functions
