50
at a time can have access to the keypad and function controls. The active throt-
tle has access to the function controls and the status of the functions for the
active throttle are displayed in the top line of the LCD. To make either throttle
the active throttle simply click it once or turn the Throttle knob a little.
No Loco Icon = nothing selected on this side of the throttle
Loco with steady smoke = Keypad and function display not active
for locomotive address selected on this throttle.
Loco with flashing smoke = Keypad and function display active for
the locomotive address selected on this throttle.
10.3.4 Mode Indicator
The mode indicator, located at the bottom center of the LCD, shows the
DT402’s current mode of operations.
The DT402 automatically defaults to the
Fn
mode and returns to this mode
when ever the EXIT Key is pressed.
The Mode indicator usually shows
what the numeric keys are associated with.
For example, in
Fn
mode, any
entry on the numeric keypad will affect functions. In
Sw
mode, keypad entries
will change turnouts and in
Lo
mode, entries on the keypad will enter loco
address numbers, etc.
The following table provides a list of the Mode indication displayed, the mode
name and the use of the mode by the DT402.
