49
10.3 Liquid Crystal Display (LCD)
DT402 LCD
10.3.1 Loco Icon
The L and R Loco icons are used to indicate whether an address is avail-
able for selection. A blinking loco icon means that the address is available for
selection and a steady loco icon means that the loco address is currently select-
ed or in use by another throttle.
10.3.2 Direction Indicators
The direction indicators are located in the LCD Display of the DT402
directly below the Loco icon. There are separate indicators for the
L
(left) and
R
(right) throttles. If the arrow points to the front of the loco, the throttle is in
the forward direction. If the arrow points to the back of the loco, then the
throttle is in the reverse direction. If there is not a locomotive selected on a
throttle the loco icon will not appear.
= Forward Direction
= Reverse Direction
Note
: These direction indicators are for decoder equipped locos only. They
will indicate direction based on the normal direction of travel that you set up
for your decoder equipped loco. If you are using an analog loco, the direction
indicator may or may not match the actual direction of the analog loco.
10.3.4 Smoke Icon
The Smoke Icon is located just above the Loco icon. Both the
L
and
R
Throttle
have a smoke icon. If a loco is selected on either throttle, the Loco icon will
appear beside the address of that loco. If nothing is selected, there will be no
Loco icon and the address area will show
SEL
. The blinking smoke icon indi-
cates which throttle is currently active (having its function states displayed in
the top line of the LCD). Since both throttles must share the keypad, only one
R Throttle Direction
Indicators
L Throtte Direction
Indicators
Text Area
Mode
Indicator
L Throttle
Address
R Throttle
Address
R Loco Icon
L Loco Icon
L Smoke Icon
R Smoke Icon
Functions 0-12
(Active Throttle)
Tetherless Indicator
Track Power
Indicator
R Semaphore
L Semaphore
R Bar Gragh
L Bar Graph
