53
10.3.8 Function Display
Whether functions 0-12 are on or off for the currently active loco address is
displayed on the top line of the LCD. In other words, the functions for the
active throttle (the one with blinking smoke) are displayed. To view the func-
tion status of either throttle, simply press the throttle knob to display the active
functions for that throttle.
10.3.9 Track Power Indicator
This very small star shaped dot
(shown larger than life) located in the top
line of the LCD on the right side indicates the status of the track power.
No indicator
= System track power is OFF (Press
PWR
key followed by
N / -
key)
Indicator On Steady
= System track power is ON (Press
PWR
key fol-
lowed by
Y / +
key)
Blinking Indicator and Trk=Idle message
= System is in “Idle” and
track power is ON (Press
PWR
key followed by
Y / +
key and
Y / +
key again)
10.3.10 Tetherless Indicator
The tetherless indicator shows when your throttle is using either infrared or
radio communications.
10.3.11 L and R Semaphores-Cab Signaling
The L and R Semaphores are used when cab signaling is implemented on
the layout. More information about signaling and detection will be avail-
able on our web site, www.digitrax.com, as these products become available.
Information on how to activate these indicators will be included in the manuals
for our detection and signaling products. Information will also be available
from other LocoNet Certified manufacturers when they have implemented
Functions 0, 1, & 3 are turned on
for address 03 on the R Throttle
the loco is running at 25% speed.
