background image

Product features may vary 

Product features may vary 

from the picture above.

from the picture above.

Product features may vary 

from the picture above.

KAWASAKI AND NINJA ARE TRADEMARKS LICENSED BY 

KAWASAKI AND NINJA ARE TRADEMARKS LICENSED BY 

KAWASAKI MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE 

KAWASAKI MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE 

OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRIES SHOULD BE 

OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRIES SHOULD BE 

DIRECTED TO FISHER-PRICE, INC./POWER WHEELS, 

DIRECTED TO FISHER-PRICE, INC./POWER WHEELS, 

636 GIRARD AVENUE, EAST AURORA, NY 14052.

636 GIRARD AVENUE, EAST AURORA, NY 14052.

KAWASAKI AND NINJA ARE TRADEMARKS LICENSED BY 

KAWASAKI MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE 

OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRIES SHOULD BE 

DIRECTED TO FISHER-PRICE, INC./POWER WHEELS, 

636 GIRARD AVENUE, EAST AURORA, NY 14052.

Please read this manual and save it 

Please read this manual and save it 

with your original sales receipt.

with your original sales receipt.

 

Tools needed for assembly: Phillips Screwdriver, Hammer and 

Tools needed for assembly: Phillips Screwdriver, Hammer and 

Adjustable Wrench (all not included); Assembly Tool (included).

Adjustable Wrench (all not included); Assembly Tool (included).

Use only with a Power Wheels

Use only with a Power Wheels

®

 12 Volt Rechargeable Battery

 12 Volt Rechargeable Battery

with A-Style Connector and Built-In Thermal Fuse and

with A-Style Connector and Built-In Thermal Fuse and

Power Wheels

Power Wheels

®

 12 Volt Charger (both included). 

 12 Volt Charger (both included). 

Owner's Manual 

Owner's Manual 

with Assembly 

with Assembly 

Instructions

Instructions

For Model 

For Model B9785

B9785

Owner's Manual 

with Assembly 

Instructions

For Model B9785

Please read this manual and save it 

with your original sales receipt.

 

Tools needed for assembly: Phillips Screwdriver, Hammer and 

Adjustable Wrench (all not included); Assembly Tool (included).

Use only with a Power Wheels

®

 12 Volt Rechargeable Battery

with A-Style Connector and Built-In Thermal Fuse and

Power Wheels

®

 12 Volt Charger (both included). 

Summary of Contents for Kawasaki Adventure 4x4





























Reviews: