Digital Projection
M-Vision 930 Series
POSITIONING THE IMAGE
Reference Guide
93
Rev A January 2014
Positioning The Image
The normal position for the projector is at the centre of the screen. However, you can set the projector above or below the centre, or to one side,
and adjust the image using the
Lens shift
feature (known as
rising and falling front
) to maintain a geometrically correct image.
Notes
For more information on shifting
the lens, see
Lens control
in the
Operating Guide
.
Whenever possible, position the
projector so that the lens is centered
for the highest quality image.
Shifting the lens up (rising front)
Centered lens
Shifting the lens down (falling front)
Summary of Contents for Titan 930
Page 8: ...Digital Projection M Vision 930 Series This page is intentionally left blank...
Page 39: ...Rev A January 2014 OPERATING GUIDE M Vision 930 Series High Brightness Digital Video Projector...
Page 70: ...Digital Projection M Vision 930 Series Operating Guide This page is intentionally left blank...
Page 83: ...Rev A January 2014 REFERENCE GUIDE M Vision 930 Series High Brightness Digital Video Projector...