Digital Projection
M-Vision 930 Series
USING THE PROJECTOR
Operating Guide
48
Rev A January 2014
Advanced Image menu continued from previous page
Fine Sync
•
V Position
and
H Position
Set the sliders as required.
•
Phase
Adjusts the phase of the pixel sampling clock relative to the incoming signal.
Adjust the phase if noise is visible.
•
Tracking
Adjusts the frequency of the pixel sampling clock. Flicker or vertical banding
indicate poor tracking.
•
Sync Level
Adjusts the voltage level of the signal detection circuitry. Adjust if the projector
loses sync during scenes where the signal drops below black.
Highlight the setting you wish to edit, and then press
ENTER/SELECT
, or the
LEFT
or
RIGHT
arrow button to open the slider.
Use the
LEFT
and
RIGHT
arrow buttons to adjust the slider.
Press
MENU
to close the slider.
Notes
Some of the settings within the
Fine
Sync
sub-menu,
Phase
,
Tracking
and
Sync Level
, affect only RGB
and Component input sources.
These settings are not available
if the projector is using a different
source.
Adjust the
Phase
after adjusting
Tracking
.
ADVANCED IMAGE >> Fine Sync >>
Select Item
Adjust
[Menu] Return
H Position
Phase
Tracking
Sync Level
V Position
100
100
100
100
100
Summary of Contents for Titan 930
Page 8: ...Digital Projection M Vision 930 Series This page is intentionally left blank...
Page 39: ...Rev A January 2014 OPERATING GUIDE M Vision 930 Series High Brightness Digital Video Projector...
Page 70: ...Digital Projection M Vision 930 Series Operating Guide This page is intentionally left blank...
Page 83: ...Rev A January 2014 REFERENCE GUIDE M Vision 930 Series High Brightness Digital Video Projector...