Digital Projection Titan 930, User Manual

Page: 48 / 145

Digital Projection
M-Vision 930 Series
USING THE PROJECTOR Operating Guide
40 Rev A January 2014
Main menu continued from previous page
3D Control
Use this sub-menu to enable, disable and set up 3D input, as follows:
•
3D Format
—
Off
,
Auto
,
Side by Side (Half)
, T
op and Bottom
and
Dual Pipe
.
•
DLP Link
—
On
(if you are using 3D glasses that can utilise the DLP Link®
signal embedded in the image) and Off
•
3D Swap — Normal and Reverse (set to Reverse if the left- and right-eye
images are displayed in the wrong order)
•
Dark Tim
e —
1ms
,
1.5ms
,
2ms
and
2.5ms
. Set to reduce the effect of
images overlapping while the glasses are switching
•
Sync Delay
— use the
LEFT
and
RIGHT
arrow buttons to compensate
for signal processing delays in the projector.
•
1080p24 3D Display
— Sets the frame rate multiplication for Frame Packed
3D. If you set this to 144Hz , 30 lines are cropped from the top and bottom of
the frame;
96 Hz
displays the full frame.
•
DVI Frame Sequential
•
External 3D Sync
MAIN >> 3D Control >>
Select Item
Adjust [Menu] Return
3D Swap
Dark Time
Sync Delay
1080p24 3D Display
DVI Frame Sequential
3D Format
Normal
1ms
100
96Hz
Off
Auto
External 3D Sync Off
DLP Link Off
Notes
For further information about
supported 3D formats, see
3D
connections in the Connection
Guide .
If
3D Format
is set to
Off
, or if
no 3D signal is detected in
Auto
mode, the following settings will be
unavailable:
•
DLP Link
•
3D Swap
•
Dark Time
•
Sync Delay
Frame Sequential is supported on
the DVI input only.
3D video is only possible on the
HDMI, HDBaseT and DVI inputs.
The
Frame Packing
format is
automatically detected by the
projector.
See also 3D types and Some 3D
settings explained further in this
guide.