Digital Projection
M-Vision 930 Series
INTRODUCTION
Remote Communications Guide
65
Rev A January 2014
Introduction
The projector can be controlled by using an external control system or a PC via an RS232 or LAN interface, using a terminal-emulation
program.
Network setup
1. Connect the projector to a LAN network.
2. Open the
Setup > Network
menu and edit network settings. The default IP address is
192.168.0.100
and the TCP port number is
7000
.
Serial Port setup
•
Baud rate
9600 bps
•
Data length 8 bits
•
Stop bits
one
•
Parity none
•
Flow control none
Notes
For details on connecting the
projector to an RS232 or LAN
network, see
Control Connections
in the
Connection Guide
.
Summary of Contents for Titan 930
Page 8: ...Digital Projection M Vision 930 Series This page is intentionally left blank...
Page 39: ...Rev A January 2014 OPERATING GUIDE M Vision 930 Series High Brightness Digital Video Projector...
Page 70: ...Digital Projection M Vision 930 Series Operating Guide This page is intentionally left blank...
Page 83: ...Rev A January 2014 REFERENCE GUIDE M Vision 930 Series High Brightness Digital Video Projector...
