Digital Projection Titan 930, User Manual

Page: 27 / 145

Digital Projection
M-Vision 930 Series
OPERATING THE PROJECTOR Installation and Quick-Start Guide
19 Rev A January 2014
Adjusting the lens
The lens can be adjusted using
Lens Control
from the
Alignment
menu, or using
the
LENS
button on the remote control. Both methods open the
Lens Control
setting in the OSD.
Lens Control allows you to adjust Zoom , Focus and Shift using the arrow
buttons. The setting operates in
Zoom/Focus Adjustment
and
Shift Adjustment
mode. While adjusting the lens, you can display either the source image or an
alignment grid.
When in
Zoom/Focus Adjustment
mode:
•
Use the
UP
and
DOWN
arrow buttons to adjust
Zoom
.
•
Use the
LEFT
and
RIGHT
arrow buttons to adjust
Focus
.
When in Shift Adjustment mode, use the arrow buttons to adjust Shift .
Press ENTER/SELECT to switch between modes as follows:
•
Zoom/Focus Adjustment mode with the source image
•
Shift Adjustment mode with the source image
•
Zoom/Focus Adjustment
mode with an alignment grid
•
Shift Adjustment
mode with an alignment grid
Lens Control
[Enter] Shift Adjustment
Zoom
Focus
Lens Control
[Enter] Zoom/Focus Adjustment
Shift
Notes