Digital Projection
M-Vision 930 Series
APPENDIX A: LENS PART NUMBERS
Reference Guide
102
Rev A January 2014
Appendix A: Lens Part Numbers
Throw ratios
Part number
Throw distance range
0.84 - 1.03 : 1 zoom lens
114-313
1.5 - 4 m (4.9 - 13.1 ft)
1.56 - 1.86 : 1 zoom lens
114-314
2 - 7 m (6.6 - 23 ft)
1.85 - 2.40 : 1 zoom lens
114-315
2.5 - 10 m (8.2 - 32.8 ft)
2.40 - 4.00 : 1 zoom lens
114-316
4 - 12 m (13.1 - 39.4 ft)
Notes
The throw ratios given here apply
only when the image fills the width
of the DMD.
For images that do not fill the width
of the DMD, the throw ratio needs to
be recalculated using a throw ratio
correction (TRC).
For further information, see
Choosing A Lens
and
Appendix B:
Lens Charts
in this guide.
Throw distance calculations are
based on the distance from the outer
end of the lens, which will vary from
lens to lens.
Lens extension is measured when
the lens is focussed at infinity,
and fully extended. At other focus
settings, the extension could be up
to 10 mm less.
Summary of Contents for Titan 930
Page 8: ...Digital Projection M Vision 930 Series This page is intentionally left blank...
Page 39: ...Rev A January 2014 OPERATING GUIDE M Vision 930 Series High Brightness Digital Video Projector...
Page 70: ...Digital Projection M Vision 930 Series Operating Guide This page is intentionally left blank...
Page 83: ...Rev A January 2014 REFERENCE GUIDE M Vision 930 Series High Brightness Digital Video Projector...
