Digital Projection Titan 930, User Manual

Page: 19 / 145

Digital Projection
M-Vision 930 Series
CHANGING THE LENS Installation and Quick-Start Guide
11 Rev A January 2014
Changing The Lens
Inserting a new lens
1. Remove the lens cover.
2. Insert the lens, keeping
the connector in upright
position.
3. Rotate the lens clockwise
until it clicks into place.
Notes
Before changing the lens,
always make sure the projector
is switched off and fully
disconnected from its power
supply.
When changing the lens, avoid
using excessive force as this may
damage the equipment.
Take care to preserve the original
lens packaging and protective caps
for future use.