Digital Projection POWER 2v, User Manual

Page: 87 / 174

The Set Projector Address is accessed through the Main menu and it allows you to
set a unique address for the projector. This will enable it to respond to commands
received from an external computer or from the remote control when using multiple
projectors.
Enter Address -Enter the address of the projector as a numeric value between 1
and 31 using the remote control. In addition to this value the projector will always
respond to an address of zero. The number will be preceded by 0 (zero), but you are
not required to key this in.
Press the “OK” soft button to save the address and to return to the Main menu.
Press the EXIT button on the remote or “CANCEL” to keep the same address and to
return to the Main menu.
CÑ35
System Operation
Set Projector Address
OPERATION
LBV00018; Revision E - 28/01/98
D i g i t a l P r o j e c t i o n
v 1 . 0
C A N C E L O K
S E T P R O J E C T O R A D D R E S S
E n t e r A d d r e s s
( R a n g e 1 t o 3 1 )
- -