Digital Projection POWER 2v, User Manual

Page: 42 / 174

When all four feet have been attached, the projector can be levelled using the black
adjustment rings on each foot which allow 25mm (1 inch) of movement. The rubber
foot base incorporates a ball socket connector which will form to an uneven surface
to assist in mounting.
Although the adjustment rings on the projector feet will allow the slight raising or
lowering of the front of the projector, it is recommended that projector is made
level and the lens tilt feature is used to perform this function.
BÑ14
System Installation
INSTALLATION
LBV00018; Revision E - 28/01/98
✍
Mounting Points
67.5mm (2.66")
262.5mm (10.33")
67.5mm (2.66")
262.5mm (10.33")
211.3mm
(8.32")
605mm (23.82")
976mm (38.42")
660mm
(25.98")
371mm
(14.60")
Adjustment
Ring
Rubber
Foot Base
Foot Shaft
Connecting Screw
Ball Socket
Connector