Digital Projection POWER 2v, User Manual

Page: 66 / 174

Chan: This is the channel number entered on the remote control keypad to select an
input. The channels are listed in numerical order and are scrollable.
Name: A name of up to 14 characters in length can be entered to describe each
channel.
IP: Specifies which input connection on the rear of the projector (1, 2 or 3) will be
used for a particular channel.
ADR: The switcher input address. If a number is preset here, the projector will
command a video switcher to select that input via the RS232 serial control cable.
Type: Denotes the type of input source for each channel. Examples of a video input
include PAL, NTSC and SECAM, While computer inputs could be VIDEO7,
TSENG, MATRX, etc. (for further information see B—17, Signal Sources ).
CÑ14
System Operation
OPERATION
LBV00018; Revision E - 28/01/98
C H A N N E L S E T - U P
S E L E C T V I E W C O P Y N E W M O D I F Y D E L E T E
C h a n
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
N a m e
V I D E O ( R G B )
V I D E O ( Y P r P b )
C O M P U T E R
1 4 C H A R A C T E R S
I P
1
2
3
A D R T y p e
V I D E O
V I D E O
C O M P U T E R