Digital Projection POWER 2v, User Manual

Page: 60 / 174

Dialogue Boxes
A number of dialogue boxes allow you to enter or change data. This is done by
using data entry fields, flyout lists, check boxes and soft buttons. Both the
ñ
and
ï
buttons can be used to move up the page and the
ò
and
ð
buttons can be used to
move down the page.
To edit a data field in a dialogue box, position the cursor over the field you want to
access and press 'ENTER'. The cursor appears over the first unused character and
the new characters are entered using the keys on the remote. Press the
ð
button to
move the cursor to the right for the next character. Press the
ï
button to delete
characters by moving the cursor one character to the left. If the data needs to be
increased or decreased in value, use the
ñ
and
ò
cursor buttons provided. Press
'ENTER' to accept any changes and to close the edit mode. To ignore any changes
made press 'EXIT'.
While data fields are being edited the menu cannot be switched off (see Menu
Operation).
Check Boxes
A check box is used to either toggle a function on or off or select one of a number
of mutually exclusive items.
Toggling a check box on/off - Position the cursor over the check box you want and
press 'ENTER'. If the function was off, a cross will appear and the function will be
turned on. If the function is already switched on, the cross will disappear and the
function will be turned off.
Selecting an exclusive check box - Place the cursor over the check box and press
'ENTER', a cross appears in the selected box and the function will be turned on. The
previous selection is cancelled.
CÑ8
System Operation
OPERATION
LBV00018; Revision E - 28/01/98
✍