Digital Projection POWER 2v, User Manual

Page: 62 / 174

Data Entry Fields
Position the cursor over the data entry field and press 'ENTER'. Next, use the alpha-
numeric buttons to enter the required characters then press 'ENTER'. Use the (left
arrow) to delete the last character.
Information Windows
There are three types of information window:
Message Boxes - provide information or advise a course of action.
Confirmation Boxes - ask you to accept or reject changes made in dialogue boxes.
Warning Boxes - indicate possible system problems. They will repeat every 15
minutes until the fault is cleared.
Password
The system password is used to gain access to the Service Set-up menu. When the
Service Set-up menu is selected from the Main menu, a Password Entry field will
appear with four underscore characters.
As each number of the password is entered, it will be displayed as an asterisk. If the
four numbers are correct on the press of the last number you will automatically
enter the Service Set-up menu. If the wrong password is entered the password
underscore characters will return.
To quit password entry for any reason press 'EXIT' on the remote, this returns you
to the Main menu. Pressing
ñ
or
ò
will also clear the Password field but will move
the cursor to another item in the menu.
If a non-numeric key, except 'EXIT',
ñ
or
ò
, is pressed during password entry, its
action will be ignored.
CÑ10
System Operation
OPERATION
LBV00018; Revision E - 28/01/98