Digital Projection POWER 2v, User Manual

Page: 24 / 174

Air Filters
There are 5 air filters in the POWER 4dv and POWER 2v projectors, one in each side
cover and three underneath. The POWER 5dv has only the 3 air filters underneath.
All filters must be regularly checked and replaced in order to prevent the projector
from overheating.
Air filters are supplied in complete sets and it is recommended that they are
replaced at least every 3 months. All filters can be replaced without the need for
special tools and complete instructions are given on pages E—4 and E—5 of this
manual.
If the Air Filters are not regularly replaced the air flow inside the projector could
be disrupted and cause overheating. Overheating may lead to the projector
shutting down during operation
Remote Control
All the functions of the POWER display are controlled from the remote control,
which can be connected via a remote receiver to the projector. When connected via
the remote receiver, it simultaneously powers the control unit, lights the remote
controls back panel and relays commands back to the projector.
To allow the operator more flexibility the remote control can be operated by four
AAA batteries, producing infra-red signals which are detected by sensors located at
the front and rear of the projector. The remote control unit is designed to transmit
command signals to the projector from a maximum distance of 80m (266ft).
The presence of very bright fluorescent lighting or Infra Red translation systems
may saturate the projectors Infra Red receivers.
AÑ14
Overview
OVERVIEW
LBV00018; Revision E - 28/01/98
✍