manualshive.com logo in svg

Digital Projection POWER 2v, User Manual

Share
Download
Digital Projection POWER 2v User Manual Download Page 56

BUTTON

ICON

FUNCTION / OPERATION

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

COL

The colour temperature can be adjusted in steps

(Colour

of 100° from 2000° to 10,000° Kelvin. Press

Temperature)

COL, then increase or decrease the temperature

using the cursor buttons.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PREV

These buttons are used to store channels.

(Previous)

Pressing the PREV button will access the  

previously stored channel configuration and 

display the image on screen without any

REV

parameter changes you have made. To view the  

(Revised)

image with any changes made, press the REV

button. Pressing the SAVE button will store any 

changes made to the channel selected. The >.<

SAVE

button restores the factory pre-set values.

>.<

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

BUTTON

FUNCTION / OPERATION

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

LENS

The LENS button is used to activate the Focus and Lens Shift 

features on projectors fitted with a motorised lens mount.

To Focus an image, press the LENS button until the Focus 

dialogue box appears on the screen and adjust using the 

ï

and 

ð

cursor buttons.

Lens Shift allows the user to adjust the horizontal and vertical 

positioning of the displayed image relative to the projector. To 

use the Lens Shift feature, press the LENS button until the Lens 

Shift dialogue box appears on the screen then position the image 

using the cursor buttons.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

CÑ4

System Operation

OPERATION

LBV00018; Revision E - 28/01/98

Summary of Contents for POWER 2v















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands