Digital Projection POWER 2v, User Manual

Page: 71 / 174

NEW Command
The NEW command allows you to set up a channel for a new input device. When
you are in the Channel Set-up menu, highlight an empty channel and select NEW.
Assuming you have enough memory left in the projector, you will enter the NEW
function. The default parameters as specified in the User Preferences menu will be
automatically entered in the data fields. These parameters can be modified as
required. If you need to define specific size, position or computer mode parameters,
this can be done using the MODIFY command after creating the new channel.
It is not essential to have the signal source present to create a new channel.
The main areas on the screen include the channel name, input, configuration,
switcher details, sync, colour temperature and aspect ratio.
Name - The channel name can be up to 14 characters
Input - The source input can be set to 1, 2 or 3 depending on which input you have
selected on the rear analogue panel. Channels 1, 2 and 3 have inputs set at 1, 2 and 3
respectively and cannot be changed.
CÑ19
System Operation
OPERATION
LBV00018; Revision E - 28/01/98
N E W C H A N N E L
S E L E C T V I E W C O P Y N E W M O D I F Y D E L E T E
C A N C E L O K
S w i t c h e r
I n p u t - - -
V I D E O 7
F i l m L o o k O N
L o o k 1
L o o k 2
C o l o u r T e m p 6 5 0 0
A s p e c t R a t i o M O D E
N a m e - - - - - - - - - - - - - - C h a n n e l 0 3
I n p u t 3
C o n f i g u r a t i o n
V i d e o C o m p u t e r
P A L
C o m p u t e r
N T S C E x t . M i x e d
S E C A M S y n c s .
C P E N T D i r e c t
R G B S y n c .
Y P r P b
S V I D E O
✍