Digital Link DL600E, User Manual

Page: 56 / 147

3-22 DL600E E1 Data Multiplexer UserÕs Guide
Forward Over IBC
(In-Band Communication)ÑEnabled or
Disabled (DefaultÑDisabled)
Enabled
ÑEnables the automatic forwarding of
SNMP
packets
over In-Band Communication from the local DL600E unit to the
remote unit.
TRAP 1st NMS IP Address
Ñnnn.nnn.nnn.nnn
(DefaultÑ
0.0.0.0)
nnn =
0
through
255
Enter the
IP
address of the Þrst Network Management Server. The
DL600E unit sends trap messages to this server. You can specify
up to
three IP
addresses of network management stations to
which the DL600E unit sends traps.
TRAP 2nd NMS IP Address
Ñnnn.nnn.nnn.nnn
(DefaultÑ
0.0.0.0)
nnn =
0
through
255
Enter the
IP
address of the second Network Management Server.
The DL600E unit sends trap messages to this server.
TRAP 3rd NMS IP Address
Ñnnn.nnn.nnn.nnn
(DefaultÑ
0.0.0.0)
nnn =
0
through
255
Enter the
IP
address of the third Network Management Server.
The DL600E unit sends trap messages to this server.
D
Note:
If all three
TRAP NMS IP
addresses are set,
the DL600E unit sends a trap to all three network
management servers.
Output Port
Ñ
COMM
(DefaultÑ
COMM)
S
elect the DL600E
NMS
port to which traps are sent.
Community Strings
Get
(text string) (Default Ñ public)
Enter an alphanumeric text string (maximum
Ñ32
characters).
The DL600E
SNMP
agent uses this text string to check GET
requests for the
SNMP
conÞguration from the
SNMP
management station.
Set
(text string) (Default Ñ public)
Enter an alphanumeric text string (max
Ñ32
characters). The
DL600E
SNMP
agent uses this text string to check
SET
requests from the
SNMP
management station to set the
SNMP
conÞguration.