Digital Link DL600E, User Manual

Page: 74 / 147

4-10 DL600E E1 Data Multiplexer UserÕs Guide
Seconds in Current 15 Min.
Displays the number of seconds elapsed in the current 15-minute
interval.
Errored Seconds in Interval
Displays the number of errored seconds elapsed in the current
15-minute interval.
Menu-2 Data DTE Status
Menu-2 Data DTE Status shows the current status of the selected data
port of the DL600E unit and the data port(s) of a remote unit.
Figure 4-2 shows an example of Menu-2 Data DTE Status in which the
remote unit can be either a SoloE1 Encore, Ensemble Encore SoloE1
Shelf card, or DL600E unit.
SW Ver 1.0 MIB Ver 1.2 Digital Link DL600 Encore 4/22/95
HW Ver A Menu-2 Data DTE Status 22:43:42
Port Local Remote
DATA1 Local Test Local Test
0-SNMP Config. 1-Main Status 2-Data DTE Status 3-Reports 4-Main Config.
5-Data Port Config. 6-Timeslot Config. 7-Alarm I 8-Alarm II 9-Diagnostics.
Type 0 through 9 for a new menu:
Figure 4-2 Menu-2 Data
DTE
Status
Data DTE Status Parameters
Data Port #
Ñ Local Test, Signal Loss, Normal
Indicates the port status. If the local or remote system does not
have a port in this position the Þeld is blank.