Digital Link DL600E, User Manual

Page: 92 / 147

5-16 DL600E E1 Data Multiplexer UserÕs Guide
Changing the Allocation for Occupied Slots
When you try to allocate an occupied slot to another port from the front
panel interface, an error message appears. You must Þrst make a slot
idle
to allocate it to another port. (This restriction is present only on the front
panel interface.)
Allocating Timeslots Contiguously Example
This example shows how to allocate timeslots 16 through 31 to data
port 2. You are in default modeÑall slots allocated to port 1. You will
change the slot allocation for port 1 to 1 through 15 to free the last 16
slots and allocate the slots to port 2.
To allocate timeslots in a contiguous order:
1
Open the
TIMESLOT CONFIG
menu by pressing
ENTER.
The
TS CONFCONTIG
submenu appears.
2
Press the
Up Arrow
to move to data port 1.
3
To reallocate slots 1 through 15 to port 1:
Ñ Press
ENTER
to activate edit mode.
The start timeslot 01 , start to blink.
Ñ Press
ENTER
to move to the end timeslot which starts to
blink.
Ñ Press the
Down Arrow
repeatedly until you reach 15 and press
ENTER
to select it.
Ñ Press
ENTER
to conÞrm your change when prompted:
TO CHANGE CONFIG
YES--ENTER, NO--EXIT
TS CONF CONTIG
TIMESLOT CONFIG
ENTER
TS CONF CONTIG
DTE01 TS = 01 -- 31 Default timeslot allocation
DTE01 TS =
01
- - 24