Digital Link DL600E, User Manual

Page: 60 / 147

3-26 DL600E E1 Data Multiplexer UserÕs Guide
Figure
3-6
, the remote unit is a DL600E unit
, Solo E1 unit or A Solo E1
Ensemble Shelf Module.
Menu-7 Alarm I Parameters
Block All Alarms
ÑYes, No (DefaultÑNo)
Yes ÑBlocks the reporting of alarms.
No ÑEnables the DL600E unit to report alarms.
NET Carrier Loss Alarm
ÑEnabled, Disabled
(DefaultÑEnabled)
Enabled ÑThe DL600E unit generates an alarm when a Network
Carrier Loss of Signal occurs.
Disabled ÑDisables the function.
NET Sync Loss Alarm
ÑEnabled, Disabled (DefaultÑEnabled)
Enabled ÑThe DL600E unit generates an alarm when a Network
Sync Loss occurs.
NET UA1 Received Alarm
(Unframed All 1s)ÑEnabled,
Disabled
(DefaultÑEnabled)
Enabled ÑThe DL600E unit generates an alarm when it receives
a UAI .
NET RAI Received Alarm
(Remote Alarm Indication)ÑEnabled,
Disabled (DefaultÑEnabled)
Enabled ÑThe DL600E unit generates an alarm when it receives
an RAI .
DATA DTE Signal Loss Alarm
ÑEnabled, Disable
Enable ÑThe DL600E unit generates an alarm when a DATA
DTE Signal Loss occurs.
Disable ÑDisables the function.
CV Threshold Alarm, CRC Threshold Alarm and FE Threshold
Alarm
CV Threshold Alarm (Code Violation)
Ñ A x
10
^
B
(DefaultÑ
Disabled
)
Set
A
and
B
in A x 10 ^ B
.
Maximum threshold is
5 x 10
-3
;
minimum
threshold is
8.1 x 10
-9
. Example:
6 x 10
-6
The alarm is generated when the
CV
s exceed the threshold.