Digital Link DL600E, User Manual

Page: 47 / 147

ConÞguring the DL600E Unit 3-13
AUX and AUX E1 Port
The two
AUX
parameters appear if the DL600E unit has the E1
drop-and-insert port and/or when the remote unit is a DL600E
unit
with the E1 drop-and-drag insert option present. All other units
make the parameter appear blank.
CRC4
ÑEnabled or Disabled (DefaultÑEnabled)
Same as
CRC4
on page
3-11
.
Line Impedance
Ñ
120 OHM, 75 OHM
Same as
75/120 OHM
on page
3-12
.
Downloading New Software
To download new software or a new download utility, use the DOWNLOAD
UTILITY 0.1 menu, opened from Menu-4 Main ConÞguration . Each
operation disrupts normal service and resets the system.
To download new software or update the download utility:
1
Insert the new software diskette in the drive.
2
From Menu-4 Main ConÞguration , type
f
(as instructed in the
menu) to start the download session.
The system prompts:
If you proceed, service will be disrupted and the unit will
be reset at the end. Proceed? [Y/N]:
Type
y
to proceed (or any other key to cancel) .
The
DOWNLOAD UTILITY 0.1
menu appears.
DOWNLOAD UTILITY 0.1
Operational Software: OK
Updated Download Utility: OK
Factory Download Utility: OK
Download RAM allocated: OK
Type S for Operational Software Download or D for Download Utility Download
Type any key to terminate this activity). [S/D]:
3
Type
s
to download the new DL600E software or
d
to
download a new download utility. (Type any other key to
cancel.)