Digital Link DL600E, User Manual

Page: 6 / 147

vi
Regulatory Compliance Standards
To maintain EMC Class B (CE Label) compliance, shielded cables should be used with
the unit.
The Digital Link DL600E module complies with
¥ CE MARK
¥ BABT NTR4
¥ Austel
TS016
¥ Swedish
SS636334
¥ German
M†9a/b
¥ Australian AS 3260
¥ FCC part 15 Class A
¥ UL 1950 3rd Edition
¥ CAN/CSA C22.2. No. 950-95 3rd Edition
European harmonized standards:
¥ 73/23/EEC
¥ 91/31/EEC
¥ 89/336/EEC
¥ 93/68/EEC
¥ 91/263/EEC
¥ 2 Mbit/s G703 (E1) interface against UK speciÞcation NTR4 (75 ohm unbal-
anced)
¥ 2 Mbit/s G.703 (E1) interface against CTR12 (120 ohm balanced, unstructured)
including protection test
¥ 2 Mbit/s G.703 (E1) interface against TBR13 (120 ohm balanced, structured)
including protection tests.
Under 89/336/EEC, as amended by 92/31/EEC and 93/68/EEC, the DL600E was tested
in accordance with EN50081-1 (1995) and EN50082-1 (1994) to the following stan-
dards: EN55022 Level B, IEC 1000-4-2, ENV50140, ENV50141, IEC 1000-4-4,
ENV50142, EN61000-4-8, and EN61000-4-11.
Under 73/23/EEC as amended by 93/68/EEC, the DL600E was tested to IEC 950 (1994)
3rd edition ; EN 60950 (1992) 3rd edition. Under 91/263/EEC, this unit complies with the
Pan-european requirements set forth in CTR 12 and TBR 13.
Under 91/263/EEC this product complies with the requirements of Annex III for Pan-
European approval under CTR 12 and TBR 13 for 120 ohm operation. This information
is contained in a report prepared by KTL. This report was submitted to BABT with a
reference number: 1MST0400 and carries the BABT logo with the approval number:
AA607035.
168