Digital Link DL600E, User Manual

Page: 86 / 147

5-10 DL600E E1 Data Multiplexer UserÕs Guide
The Comm Port Settings
The Comm Port parameters are:
BAUD RATE, PARITY, WORD LENGTH,
STOP BITS, ENABLE DCD,
and
XOFF UNTIL.
The front panel displays one parameter and its current value.
To view and modify the Comm Port settings, follow the procedure in
the example below:
1
From the
CONFIGURATION
menu, press
ENTER
to move down to
the
UNIT CONFIG
menu.
2
Press
ENTER
to open the
UNIT CONFIG
menu.
The
UNIT ID
parameter appears, for example:
UNIT ID HARRY_
3
Select the
COMM PORT CONF
submenu using the
Down Arrow
and
ENTER
.
BAUD RATE 9600
appears.
Press
ENTER
to activate edit mode.
(9600
starts to blink.)
4
Cycle through the available baud rate options using the
Up
or
Down Arrow
and press
ENTER
to select an option.
Press
ENTER
again to conÞrm the change when the system
prompts:
TO CHANGE CONFIG
YES--ENTER, NO--EXIT
or press
EXIT
to exit without executing the baud rate change.
5
To move to the next Comm Port parameter, press the
Up
or
Down Arrow
.
Use the method described above to edit the parameter.
6
Power cycle the unit to execute changes.
BAUD RATE BAUD RATE 9600