Installing Graphics Module (if applicable),
Continued
Install the
Graphics
Module(s)
To install the graphics module(s) in the BA46 system enclosure,
complete the following steps:
If you have
an...
Then...
LCSPX
1.
Install the video board clamp that came
with the kit.
2.
Make sure the two slots in the metal
bracket on the graphics module line up
with the two notches on the plastic bracket
along the rear of the system module.
3.
Press down firmly on the module until it
secures within the two front latches on the
video board clamp.
4.
Check to see if the front edge of the metal
bracket locks behind the ridge on the plastic
bracket.
Continued on next page
3–15
