Installing MS44 Memory SIMMs,
Continued
Memory
Configurations
(Model 90)
For memory configurations, refer to Table 3–1.
Table 3–1 Memory Configurations (Model 90)
Desired
Memory
Boards to Add
Slot Number
16 MB
Four 4-MB
All 0s or all 1s
32 MB
Eight 4-MB
All
64 MB
Four 16-MB
All 0s or all 1s
80 MB
Four 16-MB
0s
Four 4-MB
1s
128 MB
Eight 16-MB
All
Install the
MS44 Memory
SIMMs
To install the MS44 memory SIMMs on the KA49 system module,
complete the following steps and refer to Figure 3–3.
NOTE
For orientation purposes, some of the devices that may
have not yet been installed are shown in Figure 3–3.
Step
Action
1
Make sure the double notched lower corner of the memory
SIMM is away from the location of the power supply.
Lean the SIMM approximately 55 degrees forward and
place the memory SIMM in the connector.
2
Pivot the memory SIMM upward until the metal tabs lock
the memory SIMM in place.
Continued on next page
3–8
