Removing Power Supply
Warning
Do not attempt to open the power supply. There are
dangerous voltages inside the power supply, and there
are no user serviceable parts.
Remove the
Power Supply
To remove the power supply from the BA46 system enclosure,
complete the following steps:
Step
Action
1
Release the metal latch located at the left center of the
power supply by moving it to the left.
2
Pull forward on the colored tab, located on the right
toward the front of the enclosure just under the power
supply, and lift the front of the power supply slightly.
3
Lift the rear end of the power supply, and remove the
power supply from the system box.
4
Place the power supply on the antistatic mat.
2–12
