Installing TURBOchannel Adapter Module and Option
(if applicable)
Install the
TURBOchannel
Adapter
Module and
Option
To install the TURBOchannel adapter module and option in the
BA46 system enclosure, complete the following steps. Refer to
the
VAXstation 4000 Options Installation Guide
for additional
information.
Step
Action
1
Add standoffs to the CPU board.
2
Line up TURBOchannel adapter over the standoffs, press
down to snap the module into place, making sure the
connector is firmly seated.
3
Slide the TURBOchannel option firmly towards the
rear of the enclosure, as similar to the synchronous
communications option shown in Figure 3–4.
4
Press the front of the TURBOchannel option so that the
connector underneath mates into the connector on the
TURBOchannel adapter.
5
Screw on the filler plate.
3–11
