Removing TURBOchannel Adapter Module and Option
(if applicable)
Remove the
TURBOchannel
Adapter and
Option
To remove the TURBOchannel adapter module and option from
the BA46 system enclosure, complete the following steps:
Step
Action
1
Remove the two screws holding the filler plate on
the TURBOchannel option located at the rear of the
enclosure.
2
Lift the TURBOchannel option away from the system
module at the point directly behind the SCSI connector.
3
Place the TURBOchannel option on the antistatic mat.
4
Remove the TURBOchannel adapter module from the four
plastic standoffs.
5
Place the TURBOchannel adapter module on the
antistatic mat.
2–20
