Preparing VAXstation Model 60 for
Disassembly
Run SHOW
CONFIG
Command
To run the SHOW CONFIG command, complete the following
steps and refer to Example 2–1.
Step
Action
1
Press the Halt button located behind the door in the front
of the system box.
Results: The system displays the console prompt on the
screen.
2
Enter
SHOW CONFIG
at the console prompt and press
Return
.
>>>
SHOW CONFIG
Return
3
Record the Ethernet hardware address. This address will
be verified upon completion of the upgrade.
4
Record the SPXg/gt diagnostic ROM version. If the
version is Version 1.1 or lower, then you will need to
replace the ROM during the assembly.
Continued on next page
2–3