Removing Mass Storage Devices
Note
Before removing any cables, be sure to label and note their
locations.
Remove the
Hard Disk Drive
To remove the hard disk drive assembly from the BA46 system
enclosure, complete the following steps:
Step
Action
1
Pull the colored tab on the H-bracket toward the front of
the system. The tab is located at the upper left corner of
the bracket.
2
Lift the drive(s) and bracket from the system enclosure.
3
Disconnect both the internal SCSI and dc power cable
from the drive assembly.
4
Place the assembly on the antistatic mat.
Continued on next page
2–10
