Installing Synchronous Communications Option
(if applicable)
Install the
Synchronous
Communications
Option
To install the synchronous communications option in the BA46
system enclosure, complete the following steps and refer to
Figure 3–4.
Step
Action
1
Slide the synchronous communications option firmly
towards the back of the system enclosure.
2
Make sure that the two small openings in the metal
bracket under the rear 50-pin connector slide onto the
plastic bracket along the top rear of the system module.
3
After making sure that the connectors are carefully
aligned, press the board down firmly and directly above
the 64-pin connector.
Figure 3–4 Installing the Synchronous Communications Option
3
1
2
MLO-008163
3–12
