Chapter 6 – Initializing the GLC
GLC2400/2500/2600 Series User Manual
6–5
When the Current Screen Number, Error Status, Clock Data (Current), Change
Screen Number, and Display ON/Off setting items have been selected, a word
address is assigned to each item, in order, as shown.
In the above screen, the device address used for the
SET UP OPERATION SUR-
ROUNDINGS
setting’s
SYSTEM AREA START DEV
|
START ADR
is
“+0.”
Therefore, when the
SYSTEM AREA START DEV | START ADR
is
“D00200,”
and
the
CHANGE SCREEN NO.
setting has been designated, the address shown is
“+6”
and you will then need to enter
“D00206”
( 6) to use this address.
For details about setting the
SYSTEM AREA START DEV | START ADR,
refer to
6.5.1 – “
SET UP OPERATION SURROUNDINGS
(1:1 / n:1).”