GLC2400/2500/2600 Series User Manual
1–17
Chapter 1 – Introduction
Internal 2-Port Feature Usage Notes
• To use the internal 2-Port feature, you will need to adjust your GLC’s settings.
For information about these settings, refer to
GP-PRO/PBIII for Windows Device/PLC Connection Manual
(included with the screen creation software)
• This feature can be used only while the GLC is in ONLINE mode.
• Since the internal 2-Port feature uses the GLC’s single tool connector, you will
not be able to use equipment which requires the tool connector (i.e. a bar-code
reader, optional items, etc.)
• If you transfer screen data while the GLC is in ONLINE mode, the screen will
not change to the data transfer screen automatically. Thus, you will need to
change the screen manually to the OFFLINE mode’s [Main Menu/ Transfer]
screen.
4.1 – “Serial Data Transfer”
• Peripheral equipment, such as a Programming Console, is not compatible with
the GLC unit’s internal 2-Port feature. To use this type of equipment, you will
need to use the external 2- Port Adapter II.
When Using the External 2-Port Adapter
*1
Pro-face’s 2-Port Adapter II (GP070-MD11)
GLC
Connected to GLC unit’s Serial I/F
PC with Mitsubishi’s
GPP software installed
or
Connect to
Programming
Port
Mitsubishi PLC
(compatible
types only)
Programming
Console
1.
GLC2000 Series units can also use the 2-Port Adapter II.
For details, refer to the
GP-PRO/PBIII for Windows Device/PLC
Connection Manual
(included with the screen creation software).