GLC2400/2500/2600 Series User Manual
9
Preface
Installation Warnings:
• High voltage runs through the GLC. To prevent an electrical
shock, do NOT disassemble the GLC for any reason other
than to replace the backlight.
• Do NOT modify the GLC unit. Doing so may cause a fire or
an electrical shock.
• Do NOT use the GLC in an environment where flammable
gases are present. Operating the GLC under these condi-
tions may cause an explosion.
Wiring Warnings:
• To prevent electrical shock or equipment damage, unplug
the GLC unit’s power cord from the power supply prior to
installing or wiring the GLC.
• After completing any GLC wiring work, be sure the termi-
nal block’s protective plastic cover is reattached. If this
cover is not reattached, an electrical shock could easily
occur.
• Do NOT use power levels with the GLC that are higher or
lower than the GLC unit’s specified power range. Doing so
may cause a fire, electrical shock, or GLC damage.
Operation and Maintenance Warnings:
• NEVER touch a live power terminal. Doing so could cause
an electrical shock or a machine malfunction.
• To prevent an electrical shock, unplug the GLC unit’s power
cord before either cleaning the GLC or attaching/detach-
ing the power terminal attachment screws.
• When replacing the GLC unit’s backlight, be sure to un-
plug the unit’s power cord to prevent an electrical shock,
and wear safety gloves to prevent burns.
WARNINGS