Chapter 3 – Installation and Wiring
3–2
GLC2400/2500/2600 Series User Manual
Panel Cut
Area
Panel
Creating a Panel Cut
Create an opening with the correct dimensions to install the GLC.
For the correct installation dimensions, see
Section 2.5.4 – “GLC
Panel Cut Dimensions.”
The installation gasket, installation fasteners, and attachment screws are all re-
quired when installing the GLC.
For easier maintenance and operation, and improved ventilation, install
the GLC at least 100 mm (3.94 in.) away from adjacent structures and
other equipment.
Panel thickness should be between 1.6 and 5.0 mm (0.06 to 0.02 in.),
and should be based on the strength required to mount the GLC to the
panel.
Make sure that the installation panel or cabinet’s surface is
flat, in good condition, and has no jagged edges. Metal rein-
forcement strips can also be attached to the inside of the panel,
near the Panel Cut, to increase the panel’s strength.
Unit: mm [in.]
100
[3.94]
100
[3.94]
100
[3.94]
100
[3.94]
100
[3.94]
100
[3.94]
100
[3.94]
1.6 mm [0.06 in.] to 10 mm [0.4 in.]